Specifications; Supplied Accessories; Optional Accessories - Sony VPL-HW30AES Operating Instructions Manual

Specifications

System
Projection system
SXRD panel, 1 lens, projection system
LCD panel
0.61-inch (15.4 mm)
SXRD panel 6,220,800 pixels
(2,073,600 pixels × 3)
Lens 1.6 times zoom lens (manual)
f=18.7 mm to 29.7 mm
F2.52 to F3.02
Lamp
200 W Ultra High Pressure Lamp
Projection picture size
40 inches to 300 inches (1,016 mm to
7,620 mm) (measured diagonally)
Acceptable video signals
15 kHz RGB/component 50/60 Hz,
Progressive component 50/60 Hz,
480/60i, 576/50i, 480/60p, 576/50p,
720/60p, 720/50p, 1080/60i, 1080/50i,
1080/24PsF (48i), 1080/60p (HDMI
input only), 1080/50p (HDMI input
only), 1080/24p (HDMI input only)
Acceptable computer signals
fH: 19 kHz to 72 kHz
fV: 48 Hz to 92 Hz
Maximum resolution 1,920 × 1,080
(HDMI input only)
For details, see "Preset Signals". (1
page 77)
Input
Y P /C P /C
B B R R
Component: phono type
Y with Sync: 1 Vp-p±2dB sync
negative (75 ohms terminated)
P /C : 0.7 Vp-p±2dB (75 ohms
B B
terminated)
P /C : 0.7 Vp-p±2 dB (75 ohms
R R
terminated)
HDMI
Digital RGB/Y C
INPUT A
HD D-sub 15-pins
Analog RGB/component:
R/C (P ): 0.7 Vp-p±2 dB
R R
(75 ohms terminated)
G: 0.7 Vp-p±2 dB
(75 ohms terminated)
G with sync/Y: 1 Vp-p±2 dB sync
negative (75 ohms terminated)
B/C (P ): 0.7 Vp-p±2 dB
B B
(75 ohms terminated)
(P ) C (P )
B B R R
SYNC/HD: Composite sync input:
TTL level, positive/ negative
Horizontal sync input: TTL level,
positive/negative
VD: Vertical sync input: TTL
level, positive/negative
3D SYNC
RJ45 connector
IR IN
Minijack
REMOTE
RS-232C: D-sub 9-pins (female)
General
Dimensions
407.4 mm × 179.2 mm ×
463.9 mm (16
inches) (w/h/d)
Mass Approx. 10 kg (22 lb 1 oz)
Power requirements
AC 100 V to 240 V, 3.0 A to 1.3 A,
50/60 Hz
Power consumption
Max. 300 W
Standby mode: 8 W
Standby mode (low): 0.5 W
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage humidity
10% to 90%

Supplied accessories

Remote control RM-PJ20 (1)
Size AA (R6) manganese batteries
(2)
AC power cord (1)
Lens cap (1)
USB charging AC power adaptor
(1)
Operating Instructions (1)
3D glasses (2)*
USB charging cable (1)*
Pouch for the 3D glasses (2)*
3D Sync Transmitter (1)*
* VPL-HW30AES only
Design and specifications are subject to change
without notice.

Optional accessories

Projector Lamp LMP-H202 (for replacement)
Projector Suspension Support PSS-H10
1 × 7 1 × 18 3
/ / /
8 8 8
75