Sony SLV-X9G Operating Instructions Manual page 18

If your STB has a Scart (EURO-AV) connector
The illustration below shows an example of connecting the STB to LINE-3 IN. In this
case, set the STB CONNECTION setting to LINE3 (see page 24).
STB
STB controller's
Side view
(supplied)
: Signal flow
You can watch programmes from the Set-Top Box connected to this VCR on your TV
even when the VCR is turned off using the Line Through function. When you turn on
the STB, this VCR automatically sends the signal from the STB to the TV without
turning itself on.
1
Set POWER SAVE to OFF or PARTIAL in the OPTIONS-2 menu.
2
Turn off the VCR.
To watch a programme from the STB, turn on the STB and the TV.
For details, see page 23.
Note
• You cannot watch programmes from your STB on the TV while recording unless
you record a programme from your STB.
18
Connecting the VCR
Scart cable (supplied with
the STB)
STB
tLINE-3 IN
CONTROL
iLINE-1
AERIAL OUT
(TV)
Scart cable (not supplied)
AERIAL IN
AERIAL IN
Aerial cable
(supplied)
Scart
(EURO-AV)