Using The Audio Mixer; Enabling Or Disabling Sounds And Audio Sources; Adjusting The Screen Brightness; Vehicle Profiles - Garmin DEZLCAM OTR710 Owner's Manual

Using the Audio Mixer

You can use the audio mixer to set the volume levels for different audio types, such as navigation prompts or
phone calls. The level for each audio type is a percentage of the master volume.
1 Select .
2 Select Mixer.
3 Use the sliders to adjust the volume for each audio type.

Enabling or Disabling Sounds and Audio Sources

You can turn specific audio sources and system sounds on or off without affecting other audio sources.
1 Select .
2 In the Sounds section, select an option:
• To enable the device to speak navigation prompts and directions, select the Spoken Navigation check
box.
• To enable the device to speak traffic alerts and prompts, select the Spoken Traffic Alerts check box.
• To enable the device to play a tone when a driver awareness alert is triggered, select the Alerts and Tones
check box.
• To enable the device to play a sound when you touch on-screen buttons, select the Button Presses check
box.

Adjusting the Screen Brightness

1 Select > Display > Brightness.
2 Use the slider bar to adjust the brightness.
Entering your vehicle profile characteristics does not guarantee that your vehicle's characteristics will be
accounted for in all route suggestions or that you will receive the warning icons in all cases. Limitations may
exist in the map data such that your device cannot account for these restrictions or road conditions in all cases.
Always defer to all posted road signs and road conditions when making driving decisions.
Routing and navigation are calculated differently based on your vehicle profile. The activated vehicle profile is
indicated by an icon in the status bar. The navigation and map settings on your device can be customized
separately for each vehicle type.
When you activate a truck vehicle profile, the device avoids including restricted or impassable areas in routes
based on the dimensions, weight, and other characteristics you entered for your vehicle.

Adding a Vehicle Profile

You can add a vehicle profile that includes the weight, dimensions, and other characteristics for your vehicle.
1 Select > Vehicle Profile >
2 Select an option:
• To add a straight truck with a permanently attached cargo area, select Straight Truck.
• To add a tractor or a tractor-trailer combination, select Tractor.
• To add a bus, select Bus.
3 Follow the on-screen instructions to enter the vehicle characteristics.
After you add a vehicle profile, you can edit the profile to enter additional detailed information, such as the
vehicle identification number or trailer number
8

Vehicle Profiles

WARNING
.
(Editing a Vehicle Profile, page 9).
Vehicle Profiles