Table of Contents
Advertisement
Certification
6.1.2 CSA/Sira
The device is marked with a CSA symbol that indicates compliance with both
Canadian and U.S. requirements.
C
It is specifically approved for use in hazardous locations defined as:
•
•
•
The Certificate Body (CB) test certificate is available on SIOS at
support.industry.siemens.com/cs/ww/en/view/109794212.
6.1.2
CSA/Sira
This device meets the requirements of the following CSA/Sira standards and is
approved for use in hazardous locations under certificates Sira 16ATEX4088X and
IECEx CSA 16.0021X:
•
•
•
The device is marked with an ATEX marking.
Note
For the maximum ambient temperature, refer to the hazardous location label affixed
to the device.
6.1.3
European Union (EU)
This device is declared by Siemens Canada Ltd. to comply with essential
requirements and other relevant provisions of the following EU directives:
40
US
Class I, Division 2, Groups A, B, C, D T4
Ex nA nC IIC T4 Gc
Class I, Zone 2, AEx nA nC IIC T4 Gc
2014/34/EU (ATEX)
ATEX – Directive of the European Parliament and the Council of 26 February
2014 on the Approximation of the Laws of the Member States Concerning
Equipment and Protective Systems Intended for Use in Potentially Explosive
Atmospheres
IEC 60079-0, Edition 6.0 (2011)/EN 60079-0:2012
Explosive Atmospheres – Part 0: Equipment – General Requirements
IEC 60079-15, Edition 4.0 (2010)/EN 60079-15:2010
Explosive Atmospheres – Part 15: Equipment Protection by Type of Protection N
II 3 G
Ex nA nC IIC T4 Gc
https://
RUGGEDCOM RSG2100F
Installation Manual, 04/2022, C79000-G8976-1344-11
Advertisement
Table of Contents
