Table of Contents
Advertisement
Unsuitable Conditions
Do not use the projector under the following conditions.
Laying the unit on its side or upside down
Tilting the unit to the right or left
Avoid tilting the projector more than ± 10 degrees, and
avoid installing it in place other than a floor. Doing so may
cause color shading or shorten the lamp life excessively.
Blocking the ventilation holes
Avoid using a thick-piled carpet or anything that covers
the ventilation holes (exhaust/intake). Otherwise, internal
heat may build up.
For the locations of the ventilation holes (exhaust/intake),
see "Location and Function of Controls" on page 8.
14
GB
Installation
Installation
Using the Carrying Handles
Use the front and rear carrying handles to carry the
projector.
Caution
To avoid injury, have at least four people carry the
projector using the front and rear handles.
±10°
Using the Adjusters
When the projector installation location is not horizontal,
rotate the adjusters using a spanner so that the projector is
placed horizontally. There are an adjuster on the right and
one on the left.
Spanner
Advertisement
Table of Contents
