kd frames Studio Bifold Queen 7721 Instruction Manual page 3

7
Attach the Seat Legs (K-7) to the
Seat Rails using 2-1/4" Clevis Pins (H-8).
Secure with Washers (H-6) and Hair Pins (H-5).
H-8
Make sure that the cut-away part of
the Seat Legs (K-7) face in so that they
K-7
K-7
8
H-19
Secure Seat and Back Legs
with Wood Screws (H-19).
(These screws are self-tapping
and do not need pilot holes.)
will support the Seat Rails.
H-8
H-19
9 Using (3) Middle Slats (K-64)
push the Wood Dowels
into the edge holes on
(2) Seat Slat Caps (K-15).
Find the (2) Seat Slats (K-62)
and push them onto the
Wood Dowels on the Slat Caps.
10
Using (4) Middle Slats (K-64)
push the Wood Dowels
into the edge holes on
(2) Back Slat Caps (K-18).
Find the (2) Back Slats (K-61)
and push them onto the
Wood Dowels on the Slat Caps.
11
Push the Slat Decks
down onto the Wood
Dowels and attach with
Wood Screws (H-19).
Note:
Wood Screws are
self-tapping and do
not need pilot holes.
K-1 5
K-6 4
K-62
K-18
K-6 4
K-6 1
H-19
Back
Slat Deck
Seat
Slat Deck