Removing roller blind
Open the roller blind.
Press the lever on the right side and
lift the roller blind first at the right side
and then on the left side. Remove the
roller blind from the recesses.
The removed roller blind can be
stored under the rear floor cover as
shown in the illustration.
Storage
Depending on version, the roller blind
needs to be stored upside down and
crosswise from the left to the right
load compartment side.
Lift the rear floor cover and remove
the covers at both load compartment
sides to get access to the recesses.
Place the roller blind so that it fits into
the recesses at both sides and
reattach the covers.
Rear floor storage cover 3 60.
59