Denso BHT-100BF Operator's Manual page 5

Handling the BHT
• The BHT-100BF uses a laser light for indicating the scanning
range. The intensity of the laser light might be too low to
inflict bodily injury. However, do not look into the laser beam.
The BHT-100BF complies with Laser Safety Standard, Class II
of 21 CFR Chapter 1, Subchapter J.
The BHT-100BF does not mount beam attenuator and laser
radiation emission indicator required by this standard. Instead,
the software-controlled Magic keys (see Section 2.2
"Components and Functions") function as them because the
laser light is not enabled without the Magic keys pressed.
• Do not look into the light source through the reading window or
point the light source towards the eyes.
The light emitted through the reading window is harmful to the
eyes.
• Do not poke at the eyes with the stylus that comes with the
BHT.
WARNING