Minolta MN40WP User Manual page 26

3.2.12 Auto Power Off
This function sets the duration of time in which the camcorder will wait with
no user input before automatically powering off.
1. In Video Mode press the SETTINGS button.
2. Select 'Auto Power Off' using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (1 Minute, 3 Minutes, 5 Minutes,
Off).
4. Press the MODE button to exit the settings menu.
3.2.13 Frequency
This function sets the frequency of the camera from 50Hz to 60Hz. Please
check the frequency of your location and set accordingly.
1. In Video Mode press the SETTINGS button.
2. Select 'Frequency' using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (50 Hz, 60 Hz) the default
frequency for the United States is 60Hz.
4. Press the MODE button to exit the settings menu.
3.2.14 Format Memory Card
The format setting erases all photos, videos and data stored on your
memory card.
1. In Video Mode press the SETTINGS button.
2. Select 'Format Memory Card' using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Yes, No).
4. Press the MODE button to exit the settings menu.
NOTE: This will delete all of your media and cannot be undone.
3.2.15 Restore Default Settings
Factory default settings can be restored in this menu. This function will not
delete the media stored on the memory card, and will only restore all of the
menu's setting back to factory default settings.
1. In Video Mode press the SETTINGS button.
2. Select 'Firmware' using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Yes, No).
4. Press the MODE button to exit the settings menu.
25