Minolta MN40WP User Manual page 25

3.2.8 ISO
This function adjusts the light sensitivity in your photograph.
1. In Video Mode press the SETTINGS button.
2. Select 'ISO' using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (ISO Auto, ISO 100, ISO 200, ISO
400).
4. Press the MODE button to exit the settings menu.
3.2.9 Metering
Metering mode refers to the way in which a camera determines the appropriate
exposure (quantity of light reaching the camera lens). Spot metering will only
base the exposure setting on a very small area of the scene. Center metering
will use the light from the center of the LCD and the Multi setting measures the
light at several points on the screen.
1. In Video Mode press the SETTINGS button.
2. Select 'Metering' using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Center, Multi, Spot).
4. Press the MODE button to exit the settings menu.
3.2.10 Language
This function allows you to set the camera's interface language.
1. In Video Mode press the SETTINGS button.
2. Select 'Language' using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected language.
4. Press the MODE button to exit the settings menu.
3.2.11 Date/Time
This function allows you to set the current Date and Time on your recorded
video clips and captured photos.
1. In Video Mode press the SETTINGS button.
2. Select 'Date/Time' using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (On, Off, Date Setup).
4. Press the MODE button to exit the settings menu.
5. To set the current date and time use the UP or DOWN buttons to select
Date Setup, and press the OK button to enter date setup menu.
6. Use the UP or DOWN buttons to change the highlighted field.
7. Use the LEFT or RIGHT buttons to change the selected field.
8. Press the OK button to save the entered date and time and to exit the menu.