Whistler TITAN User Manual page 19

Table of Contents

Advertisement

MENU OPTIONS
Laser Signature ID (LSID)
Identifies the Laser gun's pulse rate or PPS (Pulses per
Second) that is transmitted by the speed laser gun. LSID
allows you to lock out PPS rates caused by non-speed
monitoring devices.
To lock out a PPS, press the Quiet button during the Laser
alert. This will place an * on the screen beside the PPS rate
and lock out this signature ID. Any new encounter with the
same Laser Signature ID will provide the display information
and two quick beeps.
Caution: Do not lock out a PPS rate if it is close to known
speed laser guns.
Segmented Selectable Laser Receiver
The laser validation windows are separated into
segments allowing for customization.
Segment Pulse Rate
Laser Area 1: 20Hz to 950Hz (.02 - .95)
Laser Area 2: 2600Hz to 3200Hz (2.6 - 3.2)
Laser Area 3: 3800Hz to 4200Hz (3.8 - 4.2)
Laser Area 1, 2, and 3 cover laser guns used in North America.
If a laser within a group is not used in your area, you may shut
off that group in Option Select Mode) by pressing the DARK or
QUIET buttons.
18

Advertisement

Table of Contents
loading

Table of Contents