Whistler TITAN User Manual page 10

Power Cord Connection
• Plug the small end of the power cord into the unit's power
port.
• Plug the large end into the vehicle's cigarette lighter/12V
accessory socket.
NOTE: Cord fits tightly into detector. When installing the cord,
expect some resistance.
The power plug USB port can be used to power or charge a
mobile device. The output for the USB port is 2A.
Fuse Replacement
The lighter/12V accessory socket plug is equipped with a
replaceable 4-amp fuse located behind the silver tip. To replace
the fuse, carefully unscrew the tip of the plug.
Important: Unscrew slowly. The tip contains a spring which
may
fly out when disassembling. Insert the new fuse with the spring
and screw on the tip. With use, screw cap on plug may loosen.
Retighten occasionally.
INSTALLATION
9