Optional Modules; Removing Optional Displayport Module - Dell OptiPlex 7000 Tower Service Manual

Steps
1. Insert the SD card reader into its slot on the system chassis.
2. Close the SD card reader bracket.
3. Replace the screw that secures the SD card reader bracket to the system chassis.
Next steps
1. Install the front bezel.
2. Install the side cover.
3. Follow the procedure in

Optional modules

Removing optional DisplayPort module

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
About this task
The following images indicate the location of the optional DisplayPort module and provide a visual representation of the removal
procedure.
78 Removing and installing components
after working inside your
before working inside your
computer.
computer.