Restoring To The Default Settings - Omron HN300T2 Intelli IT User Manual

Restoring to the Default Settings

To restore the scale to the default settings, follow the instructions below. This operation will delete all readings and
the pairing information stored in memory.
Make sure that the scale is turned off.
1
Press the [Bluetooth] button for
more than 2 seconds.
The display flashes as shown on the right.
2
Press the [Bluetooth] button
again for more than 5 seconds.
The display flashes as shown on the right and
the " " symbol stops flashing.
3
Press the [SET] button.
When the display stops flashing, all settings
will be completely restored.
Note
• The scale will automatically turn off after 10
seconds.
• This operation does not delete the
information in the app.
2 sec+
5 sec+
12