Table of Contents
Advertisement
11.4. Adjusting the Display Contrast
Adjust the contrast of the LCD after replacement of IC23 if the contrast is very strong or very
weak.
1. Press and hold [~DISPLAY ANGLE —FUNCTION] for about 2 or
more seconds until the display changes
- "CONTRAST" is selected in the display.
2. Press [ -
- Press [ -
desired contrast (adjustable range: 1-100).
- If no buttons are pressed for more than 5 seconds, the time
display returns to its original state.
- The setting remains in memory even when the power is
turned off.
12. Type Illustration of IC's, Transistors and Diodes
13. Schematic Diagram
13.1. Schematic Diagram Notes
S1:
SD cover open switch (SD OP. DET.)
S1501:
Play direction switch (REVERSE, FORWARD).
S1901:
CD eject button (
S2001:
Turntable, CD player select switch (MODE)
S2108:
Display angle setting, function setting button (~DISPLAY ANGLE -
FUNCTION)
S2111:
], [ +
] to adjust the display contrast
], [ +
CD EJECT)
38
] to change the display to the
Advertisement
Table of Contents
