Removing The 2280 Solid-State Drive From M.2 Slot One - Dell Vostro 15 5510 Service Manual

About this task
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
NOTE:
Depending on the configuration ordered, your computer may support a 2230 solid-state drive, or a 2280 solid-state
NOTE:
drive in M.2 slot one.
This procedure applies only if you are installing a 2230 solid-state drive in M.2 slot one.
NOTE:
Before installing your 2230 or 2280 solid-state drive, ensure that the mounting bracket is in the correct location. For
NOTE:
more information, see
The following image indicates the location of the 2230 solid-state drive that is installed in M.2 slot one and provides a visual
representation of the installation procedure.
Steps
1. Align the notch on the 2230 solid-state drive with the tab on the solid-state drive slot.
2. Slide the 2230 solid-state drive firmly into the solid-state drive slot at an angle.
3. Align the screw hole on the solid-state drive with the screw hole on the palm-rest and keyboard assembly.
4. Replace the screw (M2x3) that secures the 2230 solid-state drive to the palm-rest and keyboard assembly.
Next steps
1. Install the base cover.
2. Exit Service Mode.
3. Follow the procedure in

Removing the 2280 solid-state drive from M.2 slot one

Prerequisites
1. Follow the procedure in
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
NOTE:
To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
NOTE:
26 Removing and installing components
Installing the solid-state drive mounting
After working inside your
Before working inside your
bracket.
computer.
computer.