Brewing Coffee - KitchenAid 5KCM1209 Owner's Manual

PRODUCT USAGE (CONTINUED)
NOTE: When the Coffee Maker is first plugged in or when power is restored after an
interruption, the display will initially show 12:00.
IMPORTANT: Be sure to set the correct time as per the instructions in "Setting the clock"
before using Auto Set 1 or Auto Set 2 feature.
1.
Press the Auto1 or Auto 2 button one time. The Auto 1 or 2 indicator light will flash and
the time display will change to the currently set Auto Set 1 or 2 time (12:00 is the default
time).
To set the time the Coffee Maker should begin brewing: Press the H button to set hour.
The hour digits will change with each press; or press and hold to scroll rapidly.
2.
Next, press the Min button to set minute. The hour setting will stay solid and the minute
setting will begin to blink.
To save the Auto set 1 or Auto Set 2 time and exit set-up: Press any other button or do not
press any button for 10 seconds. The Auto 1 or 2 indicator will remain lit and the time
display will go back to the current time.
TIP: To cancel the Auto Set 1 or 2 time after programming is complete: Press Auto 1 or
Auto 2 button again; or press
NOTE: Default standard brewing cycle time for a full Carafe (12 cups) is approximately
10 minutes.
USING THE PREVIOUSLY PROGRAMMED AUTO SET 1 OR 2 TIME
These steps can be followed to save the Auto Set 1 or Auto Set 2 time after following the steps
in the "Programming the Auto Set 1 and Auto Set 2 feature" section.
1.
Press the Auto 1 or Auto 2 button. The Auto 1 or 2 indicator will flash and the time display
will show the previously set Auto 1 or Auto 2 time.
2. To save the current displayed time and exit set-up: Press any other button or do not press
any button for 10 seconds. The Auto 1 or 2 indicator will remain lit and the time display will
go back to the current time.
SETTING THE PLATE TEMPERATURE AND TIMER FEATURE
NOTE: Default Plate temperature for Coffee Maker is set at High Temperature (
1.
To set Plate temperature: Press
By each press, you can select between Low Plate temperature "
temperature "
2.
Press Min to set the minutes.
To save the current displayed time and exit clock set-up: Press any other button or do not
press any button for 10 seconds.
IMPORTANT: By each press, you can select time for Plate temperature from 10 minutes to
the maximum 40 minutes in 10 minute increments.
NOTE: Heating the brewed coffee for more time adds bitterness to the coffee taste. It is
advised to consume brewed coffee as early after brewing cycle completes.

BREWING COFFEE

1.
Press any of the
2. The Coffee Maker will beep 3 times when the Brew cycle is complete.
Then, the Warm mode will start with set keep warm time.
3.
After Warm mode end, the Coffee Maker will automatically turn off with one long beep. To
Cancel Brew cycle or Warm mode, press
button.
button.
".
buttons provided on side or on front to begin brewing coffee.
button once.
).
" or High Plate
7