Related Manuals for Genie NKP-VRS2
Summary of Contents for Genie NKP-VRS2
- Page 1 IP65 125KHz Vandal Resistant Networkable Keypad and Proximity Reader NKP-VRS2 User Manual Please read these instructions carefully before operating the unit and keep for further reference.
-
Page 2: Table Of Contents
Contents 1.0 Introduction ......................3 1.1 Product Features ...................3 1.2 Product Dimensions ..................3 1.3 Specification....................3 2.0 Wiring ........................4 3.0 Access Control System ..................6 4.0 Attention ......................7... -
Page 3: Introduction
1.0 Introduction The Genie NKP-VRS2 is a vandal resistant 125KHz keypad reader. The keypad comes with blue backlit buttons and a status LED as well as being compatible with Genie Sphinx access control system. 1.1 Product Features • Supports pin and card formats •... -
Page 4: Wiring
2.0 Wiring Colour Function Description Power Supply: +7V~+15VDC The LED indicator flashes when swiping Blue the card. Short to GND, LED will always on When swiping a card, the buzzer beeps Yellow Buzzer once. When shorted to GND, the buzzer will always beep Green Data0... - Page 5 User Manual IP65 125KHz Vandal Resistant Networkable Keypad and Proximity Reader Wiegand 34 Colour Function Description Black Grey Shorted to GND is WG34 format The LED indicator flashes when swiping Blue the card. Short to GND, LED will always on. Yellow Buzzer When swiping a card, the buzzer beeps...
-
Page 6: Access Control System
3.0 Access Control System Access control system provides basic password opening methods, card + user password, serial number + user password, duress password, administrator password. (Before debugging, please refer to the relevant software instructions to set the relevant parameters in the software, and then do the password opening debugging) 1. -
Page 7: Attention
4.0 Attention Read and understand all instructions carefully. 2. Follow the warnings and instructions marked on the product. 3. The tamper adopts photoelectric switch, and the back side cannot transmit light during installation. 4. The power supply of the product must be carried out in accordance with the instructions on the product label. - Page 8 Sales +44(0)1707 330541 Enquiries sales@genieproducts.co.uk Website www.genieproducts.co.uk...