Table of Contents
Advertisement
Using the Smart Wizard to Change the Setup
The Smart Wizard helps you set up your wireless access point. For information about
advanced configuration, see
The Wireless Access Point (WNTR2001) Installation Guide included in the package, explains
how to install your wireless access point. During installation, when you launch your Internet
browser, the Smart Wizard automatically displays.
After installation, to use the Smart Wizard again:
1.
Connect the wireless access point to a computer and go to http://www.mywifiext.net as
described in
Preparing to Change Your Travel Router Settings
2.
From the menu on the left, select Setup Wizard. The following screen displays:
This is the same Smart Wizard that displays during installation as described in the
Installation Guide.
3.
You can select a network from the list, or select the Manually input my wireless SSID
radio button. Click Continue. When you have chosen the network that you want to join, the
next wizard screen displays. Follow the onscreen prompts to connect to a wireless network:
4.
When the Review Settings screen displays, click Finish. If you are done making changes,
disconnect your wireless access point from your computer, and reconnect it to the device on
which you want to use it.
8 |
Chapter 1. Getting Started
Chapter 2, Advanced
Wireless Travel Router WNTR2001
Settings.
on page 6.
Advertisement
Table of Contents
