Advertisement
Exit from Service Mode
Pressing POWER button to turn off the TV once.
Initialization of TV Micro Data
After replacing Digital Board, the following initialization is required.
1) Enter Service Mode.
2) Select menu of MOID by pressing P or P during display of adjustment menu in the
Service Mode.
3) Change MOID data into MODEL ID to initialize by pressing
"MODEL ID TABLE".
For example, if initializing 32RV753, change MODEL ID into "0x0A".
Note:
MODEL ID is hex value.
4) Execute initialization of the memory.
Refer to "KEY FUNCTION IN THE SERVICE MODE".
Press "i+" + P button on TV.
5) TV is automatically turned off and on after the memory initialization is completed.
6) Enter Service Mode and select Version Check Mode. Confirm if the MODEL ID
corresponding to the model name is set correctly. If not, do over again from the start.
Note:
If the wrong MODEL ID is set, abnormal display might appear.
MODEL ID TABLE
Model ID
Model Name
(HEX)
32RV753
0x0A
Panel
Panel Inch
Vendor
Size ID (HEX)
AUO
0x05
+ or
-, refer to
Panel Vendor
Option Data
ID (HEX)
(OPT5) (HEX)
0x04
0x00
Advertisement
