Installing Engine Block - Echo CS-310 Service Manual

CS-310

8-12 Installing engine block

D
A
a1
b
a2
C
d
F
E
ENGINE
1. Assemble intake bellows (A) and intake bellows
retainer (B) to cylinder, aligning locating marks (a1)
and (b).
B
2. Install fl ange (a2) of intake bellows in the hole (c)
c
of intake insulator (C).
3. Mount engine block on engine cover (D) while
installing intake insulator (C) into the grooves (d) of
C
engine cover.
4. Tighten 4 bolts (E) at unit bottom to secure en-
gine block to engine cover. Tighten 2 screws (F) of
intake insulator. Install all other removed parts.
61