Sylvania SDVD9019-B Manual page 15

1. Lift up the panel and turn to desired angle. Slide
2. Slide the OPEN Switch to right to open the disc door. Place the disc on the center spindle with label side facing up.
Close the disc door and the player will start playback automatically.
3. During playback:
~ Press the or Buttons repeatedly to fast search for a specific section forward/backward.
Press Play Button to resume normal playback.
~ Press the or Buttons repeatedly to skip to specific track.
~ Press Button to pause, press
~ Press the VOL (Volume) +/- Buttons to adjust volume level.
~ Press the STOP Button to stop playback. The player will remember the point where disc was stopped.
When press the Play/Pause
twice to stop completely, press the Play/Pause
4. To power off, press the POWER Button on the Remote Control to turn the player to standby mode.
Repeat Playback:
Press the REPEAT Button once, the current chapter will playback repeatedly and continuously.
Press the REPEAT Button twice, the current Title will playback repeatedly and continuously.
Press the REPEAT Button the three times, all files will playback repeatedly and continuously.
Press the REPEAT Button repeatedly until turn off the repeat mode.
Repeat Playback:
Press the REPEAT Button once; the current track will
Press the REPEAT Button twice; all the tracks on the disc will
Press the REPEAT Button repeatedly until turn off the repeat mode.
(CD/DVD)Program:
1. During CD or DVD playback,
2. Using the Direction, OK and Numeric Buttons to select and set the desired T (Title),
(for CD)
of the movie /music you wants. The Program menu will appear as follows.
DVD
T C T C T
--:-- --:--
01:03
9
1 5
--:-- --:-- --:--
10
2 6
--:-- --:-- --:--
11
7
3
--:-- --:-- 12 --:--
8
4
PLAY
3. Using the Direction Button to select and highlight the "CLEAR" or
OK Button to clear all the programmed items when
(
For CD Disc programming, you can use the direction Button to highlight the programmed track, then press the
Play/Pause Button on remote control
4. Using the Direction Button to select and highlight the "PLAY" or
Button to start program playback.
OPERATIONS
the Power ON/OFF switch to "ON" position to power on the unit.
Button again to resume normal playback.
Button again, playback will start from this point.
Button to start playback from beginning,
playback repeatedly and continuously.
press the ( Program )
CD
C T C
--:--
13
--:--
14
--:--
15
16 --:--
CLEAR
there is wrong programming.
to clear the highlighted track one by one.
15
Press the STOP
playback repeatedly and continuously.
button.
2/16
TRACK04
TRACK03
+
+
Button on the screen then press the
)
Button on the screen then press the OK
数字签名
人 lxy
日期：
2017.08.0
1 10:38:14
+08'00'
Button
C (Chapters), tracks
TRACK01
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06