Changing The Wide Screen Mode Manually; Changing The Wide Setup - Sony WEGA KZ-32TS1 Operating Instructions Manual

Flat panel color television
Hide thumbs Also See for WEGA KZ-32TS1:
Table of Contents

Advertisement

Changing the Wide Screen Mode
manually
You can change the Wide Screen Mode manually
with the WIDE MODE button. When the antenna
reception is low, or the picture is too dark, the Auto
Wide function may not work properly. In this case,
set the Wide Screen Mode manually.
MUTING
POWER
VCR/DVD SAT/CABLE
TV
FUNCTION
SYSTEM
OFF
VCR/DVD
SAT/CABLE
TV
SLEEP
WIDE MODE DISPLAY
PICTURE
MODE
VIDEO
COMPONENT RGB
1
2
3
4
5
6
Press WIDE MODE repeatedly until the desired
Wide Screen Mode appears.
Pressing the WIDE MODE button once lets the TV
select the best Wide Screen Mode, and the selected
Wide Screen Mode appears.* Each time you press
the button, Wide Screen Mode changes as follows.
For details on Wide Screen Mode, see page 26.
WIDE MODE
,
Wide Mode : Zoom
Wide Mode : Full
Wide Mode : Subtitle
Wide Mode : Normal
* When "Auto Wide" in the
"Mode2," and the "4:3 Default" is set to "Normal" (page 28),
the picture remains 4:3 aspect ratio ("Normal").
Tip
Set "Auto Wide" to "Off" when changing the Wide Screen
Mode manually (See page 28).
WIDE MODE
Wide Mode : Widezoom
(Screen Control) menu is set to

Changing the Wide Setup

Auto Wide setting has two options: "Mode1" and
"Mode2."
Auto Wide: "Mode1"
Normal broadcast (4:3 aspect ratio) transmits the
control signal together with the picture signal. Some
video equipment, such as camcorders, transmit the
control signal*
1
as well. In "Mode1," the TV detects
the control signal and displays the picture with its
original aspect ratio. Note that black bands may
appear near the frame, or part of the picture may not
appear, if you select the Wide Screen Mode
manually while watching the picture without the
control signal.
Auto Wide: "Mode2"
In "Mode2," the TV selects the best Wide Screen
Mode automatically to fit the wide screen, regardless
of the control signal.
The factory setting of this TV is:
"Auto Wide" is set to "Mode2," and "4:3 Default" is set to
"Widezoom."
1
*
Control signal which returns the picture to its original aspect
ratio. The following include the control signal.
– Pictures from camcorder with specified aspect ratio
– Broadcasts with the 4:3 aspect ratio signal
Watching the TV
US
(Continued)
27
(US)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wega kz-42ts1

Table of Contents