Table of Contents
Advertisement
2. Leave the garment with the tube and air pump connected for
at least 5 minutes. This will allow for some (but not all) air to
be removed from your garment.
3. If you would like to store for routine use, simply disconnect
the connector tube from the garment and unplug the power
supply unit from the air pump.
4. Alternatively, if you would like to store your system for travel,
please refer to the
make the garment more compact.
CAUTION
Do not disconnect the electrical line from the power connection point
when disconnecting. In the event the cable comes out, insert it back
into the same side of the power connection point as illustrated in the
below diagram.
Removing air from your garment
section to
18
Advertisement
Table of Contents
