Sony SLV-D500P Operating Instructions Manual page 56

B Use this hookup if your A/V reciever has a Dolby Digital or DTS*
decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital or DTS decoder function of
your AV amplifier (receiver). You are not able to enjoy the surround sound effects of
this player. You must make connections using
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
to LINE OUT L/R (AUDIO)
l: Signal flow
[Speakers]
Rear (L)
Rear (R)
Note
• After you have completed the connection, be sure to set "Dolby Digital" to "Dolby Digital"
and "DTS" to "On" in "AUDIO SETUP" menu (page 60). Otherwise, no sound or a loud
noise will come from the speakers.
56
A/V Receiver hookup
DVD-VCR
(red)
Stereo audio cord
(not supplied)
(white)
(white)
to audio input
AV amplifier (receiver) having
a decoder
Subwoofer
and
B-1
Coaxial digital cord
(not supplied)
and or
(red)
to coaxial or optical
digital input
.
B-2
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
[Speakers]
Front (L) Center
Front (R)