Sony SLV-D500P Operating Instructions Manual page 52

7
8
9
10
To stop recording
To stop the VCR while recording, press x STOP.
To use the DVD-VCR after setting the timer
To use the DVD-VCR before a timer recording begins, just press ?/1. The timer
indicator disappears from the display window and the DVD-VCR switches on.
Remember to press ?/1 to reset the VCR to the timer recording standby mode after
using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 38).
• Display tape information on the TV screen (page 40).
• Check the timer settings (page 53).
• Watch another TV program (page 41).
Tip
• To check, change or cancel the program setting, see "Checking/changing/canceling timer
settings" on page 53.
Note
• If the VCR does not accept the PlusCode number, this means that:
– The PlusCode number is incorrect.
– ONCE, MO~FR, or Weekly was selected incorrectly. You cannot select MO~FR or Weekly
for a program that airs more than seven days ahead.
Correctly set the PlusCode number again from step 2.
• When the PlusCode number is incorrect, "Invalid Code" will appear in the display.
52
Recording TV programs using the VCR Plus+
Press B/b to select the tape speed, Auto, SP,
or EP.
Press ENTER to confirm the setting.
To enter another setting, repeat steps 1 to 7.
Press O RETURN to exit the menu.
Press ?/1 to turn off the VCR.
The timer indicator appears in the display window and the VCR stands by
for recording. When using a cable box, leave it on.
® system