Steps
1. Lift the pull tab to open the PCIe door.
2. Place the communication card on the open PCIe door.
3. Route the communication card cable using the routing guides.
4. Connect the communication card cable to its connector on the system board.
5. Close the PCIe door.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Power button
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
fan
duct.
4. Remove the
front
bezel.
About this task
The following images indicate the location of the power button and provide a visual representation of the removal procedure.
66
Removing and installing components
after working inside your
before working inside your
computer.
computer.