Processor Fan And Heat-Sink Assembly; Removing The Processor Fan And Heat-Sink Assembly - Dell OptiPlex 3000 Tower Service Manual

Next steps
1. Install the fan duct.
2. Install the side cover.
3. Follow the procedure in

Processor fan and heat-sink assembly

Removing the processor fan and heat-sink assembly

Prerequisites
1. Follow the procedure in
WARNING: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to
cool before you touch it.
CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The
oils in your skin can reduce the heat transfer capability of the thermal grease.
2. Remove the side cover.
3. Remove the fan duct.
About this task
The following images indicate the location of the processor fan and heat-sink and provide a visual representation of the removal
procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components 59