What Is The Difference Between A Moving Magnet Cartridge And A Moving Coil Cartridge - Cambridge Audio Alva Duo Manual

10
What is the difference between a moving magnet cartridge and a moving coil cartridge?
Last updated: June 28, 2022 03:30. Revision #4979
The cartridge mounted to the tonearm of your turntable uses a small stylus tip, made of diamond, to convert the information held within the groove of a
record to a signal which can then be amplified for listening.
During playback the stylus tip, attached to a cantilever, is dragged through a records groove at a consistent speed, tracing the landscape of the record
itself. The physical variations within the groove causes this assembly to vibrate, and it is this physical movement which can then be converted into an
electrical signal through electromagnetic induction.
Electromagnetic induction is a phenomenon that occurs when an inductor is placed within a varying magnetic field. As this magnetic field changes, a
current will be induced within the inductor proportional to the rate of change of the field. This principle is integral to the function of a cartridge and is
achieved using magnets and coils of wire.
Moving Magnet Cartridges.
A moving magnet cartridge uses magnets fixed to the end of the cantilever. These magnets sit within a static set of wire coils, moving within these coils
as the stylus travels along the record groove.
This movement causes a variation in the magnetic field, inducing a small current within the coils that corresponds to the movement of the stylus. This
current can then be amplified for listening using a phono preamplifier.
Moving Coil Cartridges.
The principle remains the same for a moving coil cartridge, with the primary difference being that in this assembly the coils are mounted upon the
cantilever, whilst the magnets remain fixed.
In this formation it is the coils that move in relation to the magnets, causing a variation in the magnetic field, and in turn inducing a small current. These
coils of wire are often much smaller than those used in a moving magnet cartridge, and due to this the signal generated tends to be of a much lower
level. Therefore, moving coil cartridges require a preamplifier with a dedicated MC input to provide the additional gain necessary for optimum
performance.
As the coils are mounted directly to the cantilever of a moving coil cartridge, the cantilever assembly itself is much lighter in comparison to that of a
moving magnet cartridge. This lightweight design contributes to an improved transient response, better clarity during quieter sections of audio, and
more detailed reproduction overall. However, cartridges of this type are therefore much more delicate and tend not to have any user-replaceable parts
as can be seen in many moving magnet cartridges.