Warning Indicators And Messages - Sony Cyber-shot DSC-W5 User's Manual / Troubleshooting

Warning indicators and messages

Self-diagnosis display
If a code starting with a letter of the
alphabet appears, your camera has a self-
diagnosis display. The last two digits
(indicated by
ss
the state of the camera.
If you are unable to solve the problem even
after trying the following corrective actions
a few times, contact your Sony dealer or
local authorized Sony service facility.
C:32:
ss
There is trouble with your camera's
•
hardware. Turn the power off and on
again.
C:13:
ss
The camera cannot read or write data on
•
the "Memory Stick". Re-insert the
"Memory Stick" several times.
An unformatted "Memory Stick" is
•
inserted. Format the "Memory Stick"
(page 50).
The inserted "Memory Stick" cannot be
•
used with your camera, or the data is
damaged. Insert a new "Memory Stick"
(page 89).
E:61:
ss
E:91:
ss
E:92:
ss
A camera malfunction has occurred.
•
Initialize the camera (page 52), then
turn the power on again.
86
) will differ depending on
Messages
If the following messages appear, follow
the instructions.
Turn the power off and on again
A problem with the lens has caused an
•
error.
E
The battery level is low. Charge the
•
batteries ( step 1 in "Read This
t
First"). Depending on the conditions of
use or the type of battery, the indicator
may flash even though there are still 5
to 10 minutes of remaining battery time
left.
System error
Turn the power off and then on again
•
( step 2 "Read This First").
t
Internal memory error
Turn the power off and then on again
•
( step 2 "Read This First").
t
Memory Stick error
Insert the "Memory Stick" correctly.
•
The inserted "Memory Stick" cannot be
•
used in your camera (page 89).
The "Memory Stick" is damaged.
•
The terminal section of the "Memory
•
Stick" is dirty.
Memory Stick type error
The inserted "Memory Stick" cannot be
•
used in your camera (page 89).
Format error
Format the media again (pages 49, 50).
•