Samsung Premiere LSP7T User Manual page 4

Laser projector
Hide thumbs Also See for Premiere LSP7T:
Table of Contents

Advertisement

Available languages

Available languages

Operation
• This apparatus uses batteries. In your community,
there might be environmental regulations that
require you to dispose of these batteries properly.
Please contact your local authorities for disposal
or recycling information.
• Do not drop or strike the product. If the product is
damaged, disconnect the power cord and contact
a Samsung service centre.
• When you need to turn off the Projector
completely, wait until the fan stops completely so
that the Project can cool down completely.
Power
• Do not overload wall outlets, extension cords,
or adaptors beyond their capacity, since this can
result in fire or electric shock.
• Power-supply cords should be placed so that
they are not likely to be walked on or pinched by
items placed upon or against them. Pay particular
attention to cords at the plug end, at wall
outlets, and at the point where they exit from the
appliance.
• To protect this apparatus from a lightning storm,
or when left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system. This
will prevent damage to the set due to lightning
and power line surges.
• Before plugging in the AC power cord of the
Projector, make sure that the operational voltage
of the Projector matches the voltage of your
local electrical power supply. Refer to the power
specifications section of the manual and/or the
power supply label on the product for voltage and
amperage information.
• Never insert anything metallic into the open
parts of this apparatus. This may cause electric
shock.
• To avoid electric shock, never touch the inside of
this apparatus. Only a qualified technician should
open this apparatus.
English - 4
• Be sure to plug in the power cord until it is firmly
seated. When unplugging the power cord from a
wall outlet, always pull on the power cord's plug.
Never unplug it by pulling on the power cord. Do
not touch the power cord with wet hands.
• If this apparatus does not operate normally - in
particular, if there are any unusual sounds or
smells coming from it - unplug it immediately
and contact an authorised dealer or Samsung
service centre.
• Be sure to pull the power plug out of the outlet
if the Projector is to remain unused or if you are
going to leave the house for an extended period
of time (especially when children, elderly, or
disabled people will be left alone in the house).
– Accumulated dust can cause an electric
shock, an electric leakage, or a fire by causing
the power cord to generate sparks and heat
or by causing the insulation to deteriorate.
• Use only a properly grounded plug and wall
outlet.
– An improper ground may cause electric shock
or equipment damage. (Class l Equipment
only.)
• To turn off this apparatus completely, disconnect
it from the wall outlet. To ensure you can unplug
this apparatus quickly if necessary, make sure
that the wall outlet and power plug are readily
accessible.
Cleaning
• To clean this apparatus, unplug the power cord
from the wall outlet and wipe the product with
a soft, dry cloth. Do not use any chemicals such
as wax, benzene, alcohol, thinners, insecticide,
aerial fresheners, lubricants, or detergents. These
chemicals can damage the appearance of the
Projector or erase the printing on the product.
• Do not spray water or any liquid directly onto the
Projector. Any liquid that goes into the product
may cause a failure, fire, or electric shock.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Premiere lsp9t

Table of Contents