Cordless telephone with bluetooth and digital answering machine (108 pages)
Summary of Contents for Panasonic ET-PLF10
Page 1
Lens Fixed Attachment Commercial Use ET-PLF10 Model No. ENGLISH Thank you for purchasing this Panasonic product. ■ To ensure safe and correct use, please read this manual together with the operating instructions supplied with the projector carefully. ■ Before using this product, be sure to read “Read this first!” ( Page 3).
Doing so may cause a loss of performance or safety. Information for users in the European Union Importer’s name and address within the European Union Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany ENGLISH - 3 Downloaded from ManualsNet.com...
Before Use ■ Overview This product suppresses vibration of projection images due to vibration of the lens by fixing the projection lens of the projector. ■ Supported Projectors PT-RQ32K, PT-RZ31K, and PT-RS30K series PT-RQ13K, PT-RZ12K, and PT-RS11K series Note z Models other than the above may also be supported. Refer to the operating instructions of the projector you are using.
Attaching Preparing the Projection Lens Attach the lens fixing attachment after installing and adjusting the lens. If the lens hood, which is an accessory of the projector, is already mounted, it must first be removed. The lens will become unable to be adjusted after the lens fixing attachment is attached. Preparing the Lens Fixing Attachment Lens fixing attachment bracket 1) Remove the two upper thumbscrews (inserted...
Attaching (continued) Attaching the Lens Fixing Attachment Screws The illustrations for this procedure use the PT- RZ31K as an example. 1) Remove the screws from the four places around the projector lens. Screws Screws 2) Fix the upper part the lens fixing attachment mount bracket using two of the screws that were removed in step 1.
Page 7
Attaching (continued) 5) Fix the upper part of the lens fixing attachment bracket using the thumbscrews removed in step 1 of "Preparing the Lens Fixing Attachment." 6) Fix the lower part of the lens fixing attachment bracket by tightening the thumbscrews (two places).
Page 8
Attaching (continued) <When using the ET-D75LE90 / ET-D75LE95 lens> The lens fixing brackets (B) may interfere with the screws on the lens side depending on the state (i.e., focus adjustment) of the lens. If they interfere, reattach and use lens fixing brackets (B) in the positions for lens fixing brackets (A).
Attaching (continued) Attaching the Lens Hood If you need to attach the lens hood, attach it after attaching the lens fixing attachment. Attention z When mounting the lens hood supplied with the projector to the projector, be sure to request installation from your dealer or certified personnel.
Page 10
Attaching (continued) <When using the ET-D75LE8 / ET-D75LE40> 1) Attach lens hood 2 to lens hood 1. Lens hood 2 Thumbscrews 2) Attach the thumbscrews (one place each at top and bottom) to fix lens hood 2. 3) Tighten the left and right lens hood screws (one on each side) of lens hood 2.