Welcome; Congratulations - Heat & Glo TIARII-BK-IPI Owner's Manual

1 1

Welcome

Read the Installation Manual before making any installation or finishing changes.
A. Congratulations
Congratulations on selecting a Heat & Glo gas fireplace, an
elegant and clean alternative to wood burning fireplaces. The
Heat & Glo gas fireplace you have selected is designed to
provide the utmost in safety, reliability, and efficiency.
As the owner of a new fireplace, you'll want to read and
carefully follow all of the instructions contained in this owner's
manual. Pay special attention to all cautions and warnings.
This owner's manual should be retained for future reference.
DEALER: Fill in
your name, address,
phone and email
information here and
appliance information
below.
Appliance Information:
Brand: ________________________________________________ Model Name: ___________________________
Serial Number: __________________________________________ Date Installed: __________________________
Listing Label Information/Location
Model Name
Model/(Modèle): TIARII-IPI
Type of Gas (SorteDeGaz):
Vented gas fireplace heater - Not for use with solid fuel.
Appareil de chauffage de foyer avec conduit d'évacuation
des gaz – n'utilisez pas avec des combustibles solides.
INSTALLATION MANUAL
OWNER'S MANUAL
Minimum Permissible Gas Supply for Purposes of Input Adjustment.
Approved Minimum (De Gaz) Acceptable..................... 5.0 in. w.c. (Po. Col. d'eau)
Maximum Pressure (Pression)......................................10.0 in. w.c. (Po. Col. d'eau)
Maximum Manifold Pressure (Pression).......................3.5 in. w.c. (Po. Col. d'eau)
Minimum Manifold Pressure (Pression)........................1.7 in. w.c. (Po. Col. d'eau)
Minimum rate with variable regulator on control valve
Total Electrical Requirements: 120Vac, 60Hz., less than 12 Amperes
Gas and Electric
Information
PART # / REV: 2340-990_R11
ORIGINATOR: Spidlet
2 Heat & Glo • TIARII-BK-IPI, TIARII-BR-IPI, TIARII-CES-IPI Owner's Manual • 2340-981_R16 • 06/22
Read this manual before operating this appliance.
Please retain this Owner's Manual for future reference.
Local Dealer Information
Dealer Name: ________________________________________________________
Address: ____________________________________________________________
____________________________________________________________
Phone: _____________________________________________________________
Email: _____________________________________________________________
Serial Number
HF
Serial No.
NATURAL GAS
ANSI Z21.88-2019/CSA 2.33-2019
CAN/CSA - P.4.1-15 • FE 69.7% Natural Gas / 68.9% Propane
USA CANADA
ALTITUDE: ..................0-2000 FT ............. 0-4500 FT.
MAX. INPUT BTU/h .....37,000 ................... 37,000
MIN. INPUT BTU/h ......26,000 ................... 26,000
ORIFICE SIZE .............#32 DMS ............... #32 DMS
Type of Gas
ECO: 93490
DATE: 05/11/20
352 Mountain House Road
Halifax, PA 17032
We suggest that you keep it with your other important
documents and product manuals.
The information contained in this owner's manual, unless
noted otherwise, applies to all models and gas control
systems.
Your new Heat & Glo gas fireplace will give you years of
durable use and trouble-free enjoyment. Welcome to the
Heat & Glo family of fireplace products!
The model information regarding your specific fireplace can be found
on the rating plate usually located in the control area of the fireplace.
Heat & Glo
a brand of Hearth & Home Technologies
BARCODE LABEL BARCODE LABEL
352 Mountain House Road Halifax
VENTED GAS FIREPLACE
HEATER MH61818
MADE IN USA
LABEL TICKET
LABEL SIZE: 2.5 in x 11.5 in.
ADHESIVE: 468
MATERIAL: 24 Gauge Aluminum
INK: Black - Aluminum Background
(1) Small hole = Ø.187
(1) Large hole = Ø.875
(4) Corners = R.062
Barcode label must have the serial number on it. The
barcode label must be able to read Code 39 Full ASCII.
This appliance must be installed in accordance with local codes, if any; if
none, follow the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or the
Natural Gas and Propane Installation Code, CSA B149.1. Cet appareil doit
être installé conformément aux codes locaux, s'il y a lieu; sinon, suivez le National
Fuel Gas Code, ANSI Z223.1/NFPA 54, ou le Code d'installation du gaz naturel et du
propane (Natural Gas and Propane Installation Code),CSAB149.1.
For a manufactured home (USA only) or mobile home OEM installation: This
appliance must be installed in accordance with the Standard for Manufactured
Housing, CAN/CSA Z240MH, in Canada; or with the Manufactured Home Construction and Safety
Standard, Title 24CFR, Part 3280 in theUnited States; or when such a standard is not applicable, the
Standard for Manufactured Home Installations Standard, ANSI/NCSBCSA225.1/NFPA501A.
For use only with barrier Part No. 7011-030
A utiliser uniquement avec barrière Référence 7011-030
Date of Manufacture / Date de fabrication
2020 2021 2022 JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
Manufactured by/Fabriqué par: Hearth and Home Technologies
MH61818
2340-990_R11