Start Recording While Checking The Subject On The Lcd Screen; View The Recorded Picture On The Lcd Screen - Sony Handycam DCR-HC20 Operation Manual

3

Start recording while checking the subject on the LCD screen.

The date and time is not set up in the default setting. To set the date and time, see page 17.
a
Set the LENS COVER
switch to OPEN.
b
Open the LCD panel.
c
While pressing the green
button, slide the POWER
switch down to light up
the CAMERA lamp.
The power turns on.
d
Press REC START/STOP.
Recording starts. To change to
the standby mode, press REC
START/STOP again.
You can also record by pressing
REC START/STOP beside the
LCD screen.
4

View the recorded picture on the LCD screen.

a
Slide the POWER
switch repeatedly
until the PLAY/EDIT
lamp lights up.
b
Touch
c
Touch
start the playback.
To stop, press
To turn off the power, slide the
POWER switch up to OFF
(CHG), then set the LENS
COVER switch to CLOSE.
(rewind).
(play) to
(stop).
9
Quick Start Guide