EAM30580
HANDLING NOTE
ECA27150
NOTICE
Do not disassemble the venturi block "1"
and main nozzle "2" because it will cause a
drop in carburetor performance.
EAM30573
CHECKING THE CARBURETOR
1. Check:
• Carburetor body
• Float chamber
• Jet housing
Cracks/damage Replace.
2. Check:
• Air passage
Obstruction Clean.
ECA27160
NOTICE
When cleaning the main air passage, do not
blow air at the filter side because it will clog
the passage with mud or sand.
TIP
• Use a petroleum based solvent for cleaning.
Blow out all passages and jets with com-
pressed air.
• Never use a wire.
• When cleaning the main air passage, blow air
through it while covering the nozzle with a
clean rag.
a. Main air passage
3. Check:
• Fuel passages
Obstruction Clean.
a. Wash the carburetor in a petroleum-based
solvent. Do not use any caustic carburetor
cleaning solution.
b. Blow out all of the passages and jets with
compressed air.
4. Check:
• Float chamber body
Dirt Clean.
5. Check:
• Float chamber rubber gasket
Cracks/damage/wear Replace.
6. Check:
• Float
Damage Replace.
7. Check:
• Needle valve "1"
• Needle valve seat "2"
Damage/wear "a" Replace.
Obstruction "b" Clean.
a
7-5
CARBURETOR
2
b
1