Table of Contents
Advertisement
Disassembly and Assembly Instructions
11-2. Assembly Instructions
1
1) insert sub key pba connector to sub key
pba
1) Press 3*4 keypad's low side when Combine that
2) Notice the RCV is fixed
3
1) Press the Lower's hook
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Connect LCD FPCB to sub key pba
2) Connect receiver FPCB to tsp and sub
pcb
3) Connect slide FPCB to sub key pba
4) Place sub key pba to upper
1) Observe silk line When insert FPCB
4
1) Screw four bolts for fix upper and lower
11-4
Advertisement
Table of Contents
