9
1) Disjoint using disjoint knife begin at lower.
1)
Notice the damage of the
11
1) Separate slide FPCB from LCD
2) Separate receiver module from TSP, Sub PBA
3) Separate LCD connector from Sub PBA
4) Separate Sub PBA from sub key PBA
LCD FPCB
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
10
1) Disconnect tsp connector
2) Disconnect slide FPCB connector from sub
pba
3) Unzip receiver connector from sub pba
4) Disconnect LCD connector from sub pba
5) Unzip sub key pba connector from sub pba
1)
Notice the damage of the
11-3
LCD FPCB