Step 1: Connect Your Hd Source - Sling Media Sling Slingbox PRO-HD SB300-100 User Manual

STEP 1 : CONNECT YOUR HD SOURCE
4
VIDeo :
If you have a high-definition device, you can connect it to
your Slingbox with the included component video cables.
Component video cables have a set of green, blue and red
connectors. Connect these cables to the component jacks
labeled In on your Slingbox PrO-HD. These jacks are in the top
row on the back of your Slingbox. Connect the other ends of
the component cables to the output component jacks on your
HD video source.
If your HD a/V source is already connected to your TV with
component cables, disconnect them from the TV and then
re-connect these cables to the component In jacks on your
Slingbox. Use the matching cable set included with your
Slingbox to connect to the component OUT jacks on the back of
your Slingbox, and then to the In jacks your TV.
NOTE: THE SLINGBOX PRO-HD SUPPORTS RESOLUTIONS UP
TO 1080i. IF YOUR A/V SOURCE OUTPUTS 1080p, YOU MUST
SET IT TO 1080i . THE SLINGBOX WILL NOT WORK WITH 1080p.