Step 6: Attach The Power - Sling Media Sling Slingbox PRO-HD SB300-100 User Manual

STEP 6 : ATTACH THE pOwER ADApTER
• Connect the power adapter cable into the Slingbox
POWEr jack.
• Plug the power adapter into an electrical outlet.
When plugged in, the power light comes on, and the lights
blink a few times as the Slingbox starts up. The network light
will remain on while your Slingbox is successfully connected to
your network. both the power and network lights should be on
and not blinking.
TIP: If the network light does not come on within 30 seconds,
make sure that you have correctly connected the Slingbox to your
network router. Check the connectors to see that they are firmly
inserted. If the network light still does not come on, try resetting
your Slingbox by holding down the reset button on the back for 10
seconds. When you let go of the button, the network light should
come on. See Troubleshooting on page 13 for more solutions, or
go to: http://support.slingmedia.com
WARNING: THE INCLUDED POWER SUPPLY IS FOR THE
SLINGBOX PRO - HD. DO NOT USE THIS POWER SUPPLY
ON THE SLINGBOX CLASSIC, THE SLINGBOX AV OR THE
SLINGBOX PRO.
NETWORK POWER
11