6.1.2 Atex/Iec Ex; European Union (Eu) - Siemens RUGGEDCOM i803 Installation Manual

Certification
6.1.2 ATEX/IEC Ex
•
The device is marked with a CSA symbol that indicates compliance with both
Canadian and U.S. requirements.
C
Declarations of Conformity are available on SIOS:
•
•
The Certificate Body (CB) test certificate is available on SIOS at
support.industry.siemens.com/cs/ww/en/view/109794217.
6.1.2 ATEX/IEC Ex
This device meets the requirements of the following ATEX/IEC Ex standards:
•
It is specifically approved for use in hazardous locations defined as:
•
•
•
6.1.3

European Union (EU)

This device is declared by Siemens Canada Ltd. to comply with essential
requirements and other relevant provisions of the following EU directives:
•
•
26
ANSI/ISA-12.12.01-2007
Non-Incendive Electrical Equipment For Use In Class 1 And 2, Division 2 And Class
3, Divisions 1 And 2 Hazardous (classified) Locations
US
https://support.industry.siemens.com/cs/ww/en/view/109476357
Safety)
https://support.industry.siemens.com/cs/ww/en/view/109476358
Locations)
IEC/EN 60079-15:2005
Electrical Apparatus for Explosive Gas Atmospheres - Part 15: Construction, Test
and Marking of Type of Protection "N" Electrical Apparatus
EEx nC IIC T4
Ex II 3 G
12-24 VDC, 2A, Class III
EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
(General
(Hazardous
https://
RUGGEDCOM i803
Installation Manual, 04/2022, C79000-G8976-1005-07