DeWalt DCS355D1 Quick Start Manual

Carhartt Workshop Quick Start Guide
DeWalt Oscillating Multi-Tool DCS355D1
User Manual
Information pertinent to setup:

This tool is intended to be used for detail sanding, plunge cutting, flush cutting, removal of
excess materials and surface preparation.

Do not use in wet conditions or in the presence of flammable gas or liquid.

Tool comes with sanding head, wood blade, depth guide, and universal adaptor nut with
washer.

Make sure area is well ventilated as this tool can produce airborne debris.
Information pertinent to usage:

Ensure you know where electrical and power lines are before cutting into floors, walls, or any
other area.

This tool features a quick-change accessory system. This allows for faster accessory changes
without the need for wrenches or hex keys like other oscillating tool systems.
*Before Changing attachments always disconnect from power and remove battery
o 1. Grasp the tool and squeeze the accessory clamping lever (C) as shown in Figure 3.
o 2. Clean any residual debris from the tool shaft and the accessory holder.
o 3. Slide the accessory between the shaft (J) and the accessory holder making sure the
accessory engages all eight pins on the holder and is flush with the shaft.
o 4. Release the accessory clamp lever.