Sirius Satellite Radio PowerConnect XMP3IVKUG0210 User Manual page 60

Troubleshooting
If this happens:
No audio when using the Aux In
Cable or Cassette Adapter
Audio sounds too soft
Audio fades or has static when
listening
60
Try this:
• Check all cables between your Satellite Radio
and your vehicle's stereo system for a firm and
secure connection .
• Ensure you have selected the proper input
source on your vehicle's stereo system .
• Ensure that the FM Transmitter in the Radio
is turned Off, and increase the audio level
of the Radio . Refer to the User Guide which
accompanied your Radio for instructions .
• Raise the volume of your stereo system or
increase the audio level of your Satellite Radio
until the sound quality improves . Refer to the
User Guide which accompanied your Radio for
instructions .
• Check all cables for a firm and secure connection .
• If you are using PowerConnect or the FMDA
to listen via your vehicle's FM radio, and the
problem persists, it most likely is interference
from another commercial or broadcast FM
station . You will need to find an unused or
available FM channel in your area . Refer to step
5 on page 43 .
• If you are using PowerConnect, and you cannot
solve the audio problem, try connecting the
audio using the Aux In Cable or a Cassette
Adapter . (Refer to page 39 and page 41 .) If you
cannot use those solutions, consider using an
FMDA . (Refer to page 45 .)