Maintenance; Cleaning The Sewing Machine Surface; Cleaning The Hook - Singer Fashion Mate Instruction Manual

Maintenance

Attention: Disconnect the power cord from the wall socket before cleaning the sewing machine
surface, otherwise injury or electrical shock may result.

Cleaning the sewing machine surface

If the surface of the sewing machine is dirty, lightly soak a cloth in mild detergent, squeeze it out firmly
and then wipe the surface. After cleaning it once in this way, wipe the surface again with a dry cloth.
Attention: This machine is equipped with a 100 mW LED lamp. If lamp replacement is needed, please
contact nearest authorized retailer.

Cleaning the hook

If lint and bits of thread accumulate in the hook, this will interfere with the smooth operation of the
machine. Check regularly and clean the stitching mechanism when necessary.
Attention: Disconnect the machine from the wall outlet before carrying out any maintenance.
Downloaded from ManualsNet.com
Remove the needle plate cover and bobbin.
Remove the needle, presser foot and presser foot holder.
Remove the screw holding the needle plate and remove the
needle plate.
Clean the feed dog and bobbin case with a brush. Also clean
them, using a soft, dry cloth.
search engine
34