Table of Contents
Advertisement
Quick Links
Thank You!
Thank you for choosing a JENSEN product. We hope you will find the instructions in this
owner's manual clear and easy to follow. If you take a few minutes to look through it, you'll learn
how to use all the features of your new JENSEN / Sirius MSR4500 satellite radio for maximum
enjoyment.
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Installation
Getting Started
It's a good idea to read all of the instructions before you begin the installation.
System Components
The following components are required for complete operation of the satellite radio features.
•
MSR4500 head unit
•
Power cable (included)
•
Jensen/Sirius DLP2000 satellite receiver (purchased separately)
•
Sirius satellite antenna (purchased separately)
Note: You will need to subscribe to Sirius Satellite Radio in order to use the
satellite features of this radio. After purchasing the required satellite receiver
(DLP2000) and Sirius Antenna, contact Sirius at 1-888-539-SIRIUS to subscribe.
MSR4500
¡Muchas gracias!
Muchas gracias por escoger un producto JENSEN. Hemos hecho lo posible para que las
instrucciones en este manual sean claras y fáciles de seguir. Si se da unos pocos minutos para
leerlo, aprenderá a usar todos los elementos de su nuevo estéreo Jensen/Sirius para carros
para que pueda disfrutarlo al máximo.
Instalación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Operación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Especificationes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Correción de problemas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Garantie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Installation
Getting Started
It's a good idea to read all of the instructions before you begin the installation.
System Components
The following components are required for complete operation of the satellite radio features.
•
MSR4500 head unit
•
Power cable (included)
•
Jensen/Sirius DLP2000 satellite receiver (purchased separately)
•
Sirius satellite antenna (purchased separately)
Note: You will need to subscribe to Sirius Satellite Radio in order to use the
satellite features of this radio. After purchasing the required satellite receiver
(DLP2000) and Sirius Antenna, contact Sirius at 1-888-539-SIRIUS to subscribe.
Advertisement
Table of Contents
Related Manuals for Jensen MSR4500
Summary of Contents for Jensen MSR4500
- Page 1 Thank you for choosing a JENSEN product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new JENSEN / Sirius MSR4500 satellite radio for maximum enjoyment.
-
Page 2: Tools And Supplies
Remove Radio from Sleeve Retire la Radio de la Camisa GMC / Dodge / Jeep Installation (continued) Tools and Supplies The following tools and supplies are needed to install the radio. • Torx type, Flat and Phillips screwdrivers • Wire cutters and strippers •... - Page 3 Import Importe Replacing an Aftermarket Radio Reemplazo de la Radio Vieja Install Half-Sleeve Instalación de la Camisa Installation (continued) Preparation (continued) Remove Old Radio (continued) Import Remove dash panel to expose DIN chassis. Remove screws that secure radio to the dashboard. Disconnect wiring harness and remove radio.
- Page 4 MSR4500 Wiring Diagram Diagrama de Cableado...
-
Page 5: Final Installation
Final Radio Installation Instalacion Final de Radio Installation (continued) Final Installation Radio Connect wiring adaptor to existing wiring harness. Connect antenna lead, and make any appropriate connections for Sirius and Auxiliary Input. Slide radio chasis into half-sleeve. Secure Radio to bracket using nut (if possible). Replace any items you removed from the dashboard. -
Page 6: Basic Operation
Basic Operation Audible Beep Press AUD for three seconds to turn beep on or off. When beep is on, the Audible Beep symbol appears in the display. Mode Press MODE to select from the following modes: Radio (TUNER), Satellite Radio (SIRIUS), CD Player (CD Player), CD changer (CD Changer) or Auxilliary (AUX) . - Page 7 MSR4500 Audible Beep Pitido Audible Modalidad Volume Volumen Adjust Sound Ajuste Sonido Basic Operation Mode Operación Basica Basic Operation (continued) Bass Momentarily press AUD until “BASS” appears in the display. Press the volume buttons to adjust Bass up or down from -6 to +6.
- Page 8 Removing the Faceplace Retire la Placa Frontal Reset Button El Botón Reset Remove Radio from Dash Extracción del Radio del Aotomóvil Basic Operation (continued) Flip-Down Detachable Faceplace The flip-down faceplace can be detached by following these steps: Press OPEN, and the faceplate will flip down. Remove the locking screw (if used).
-
Page 9: Radio Operation
Radio Operation Seek Tuning Press the up or down tuning buttons (>> or <<) for less than one second to seek the next strong station in the current band. Scan Press SCAN to scan through strong stations in the current band. The radio will pause for five seconds at each station. -
Page 10: Satellite Operation
Satellite Operation Acquiring Signal When Satellite Mode is selected, “Sirius” will scroll across the first line of the display one time, then “Acquiring Signal” will scroll. Once a signal is acquired, the letters “SAT”, along with the satellite dish icon, will appear in the display. If the user is not subscribed, “Call 888.539.SIRIUS To Subscribe”... -
Page 11: Seek Tuning
Satellite Operation (continued) Selecting a Mode Direct mode is set as the default mode for the unit. To select category mode, press FUNC for less than one second. “CATEGORY” will appear in the lower right corner of the display. To return to direct mode, press FUNC for less than one second. -
Page 12: Manual Tuning
Satellite Operation (continued) Manual Tuning Use manual tuning to move through channels one at a time in either direct or category mode. Direct Mode Press the up (>>) or down (<<) tuning button momentarily to select the next sequential channel. Category Mode Press the up (>>) or down (<<) tuning button momentarily to select the next sequential channel. - Page 13 Satellite Operation (continued) Store Preset Channels/Categories Up to 20 channels and 20 categories can be stored in memory for quick recall using the number buttons (0-9). When a preset is stored, “Preset ##” will appear in the display for two seconds. Direct Mode To store a single-digit preset (1-9), tune the radio to the desired channel.
- Page 14 Satellite Operation (continued) Skip and Restore Channels In direct mode, the radio can be programmed to skip selected channels. There is no skip function in category mode. Skip Channel Select direct mode. Use direct access to select the channel you want to skip. Press FUNC and SELECT simultaneously for more than three seconds.
-
Page 15: Cd Player Operation
CD Player Operation Insert CD Press OPEN. Faceplate will flip down. Insert CD into slot with the label side facing up. Flip the faceplate up to close. Eject CD Press OPEN. Faceplate will flip down. Press the eject button to eject the CD from the slot. The power does not need to be on to eject the CD. - Page 16 Open Fast Forward and Fast Reverse Avance y Retroceso Rápidos Program / Programa Repeat / Repitir CD Player Operation (continued) Program Mode Press PGM for more than three seconds. The PROGRAM icon will flash on the display when program mode is accessed. Program up to 24 CD tracks to play in any order by selecting a track for each spot in the playing sequence.
-
Page 17: Cd Changer Operation
CD Changer Operation Note: The MSR4500 is designed to control an optional CD changer. The compact disc changer plays all songs on a disc then advances to the next disc in order. Skip Tracks, Direct Track Access, Fast Forward, Fast Reverse, Pause, Repeat, Random and Intro Scan functions can be performed on CD’s played through the CD... -
Page 18: Specifications
Specifications CD Player Signal/noise ratio............>86 dB Frequency response . -
Page 19: Troubleshooting
Troubleshooting Problem Cause Does not operate (display No power to yellow wire, or no power to does not light) red wire Inline fuse blown No power to unit Inline fuse blown Speakers not operating Speaker harness not connected (display lights normally) Not all speakers operate Incorrect splices or connections Speaker wires shorting to chassis... -
Page 20: Warranty
Warranty Limited One Year Warranty–USA & Canada Length of Warranty: This warranty from Recoton Mobile Electronics shall be in effect for a period of one year from the date of the first consumer purchase. Persons Protected: This warranty will be enforceable by the original owner and any subsequent owners during the warranty period so long as proof of date of purchase from an authorized Jensen dealer is presented whenever warranty service is required.