Table of Contents
Advertisement
9.2.3
9.3
Status
Element rows
Max temperature contact
External enable 1
External enable 2
Element row x active
Alarm condition
Alarm acknowledged
Alarm relay output
50
Tank sensor offset
If the indicated tank temperature does not match the actual water temperature: change
the Tank Sensor Offset.
To change the Tank Sensor Offset:
1.
From the Temperatures submenu open the Tank Sensor Offset control screen.
2.
Change the temperature offset:
a)
Use [+] to increase the offset.
b)
Use [-] to decrease the offset.
3.
Press [ACCEPT] to confirm the value or press [BACK] to return to the previous
screen.
Appliance Status
The Element Status submenu shows detailed information on the appliance:
Current status of the appliance.
Number of rows of elements in the appliance.
Closed: temperature is below the maximum
Open: Temperature has been above the maximum, and the
temperature protection circuit has activated.
Input 1 open or closed.
Input 2 open or closed.
Elements in this row are active.
Yes: the relay output has been triggered by an alarm.
No: no alarm.
Not used.
Closed: the relay output has been triggered by an alarm.
Open: no alarm.
Installation, Maintenance and Service part
Advertisement
Table of Contents
