These microphones are hand assembled in the U.S.A. from state- of-the art transducers, transformers and metals as the pinnacle of Shure quality for prestigious vocal and acoustic performances. Revolutionary Roswellite ribbon material replaces traditional foil ribbons with high tensile strength, toughness and shape memory that provides superior resilience at extreme SPLs.
When addressing the rear side of the KSM353 please remember to invert the signal polarity.* *Shure’s A15PRS accessory is an in-line, balanced, polarity reversing switch capable of this operation and is available online at: store.shure.com...
To protect your microphone, keep a few simple precautions in mind to ensure long term performance: 1. Store your microphone in its protective case when it is not in use. Leaving the microphone lying around will expose the ribbon element to dust and other airborne particles that can adhere to the inner assembly and decrease performance.
SPECIFICATIONS Transducer Type Roswellite™ Ribbon Frequency Response 30Hz – 15,000Hz Polar Pattern Bidirectional Output Impedance Transformer, balanced, actual 270 Ω Polarity Positive pressure on front side of ribbon produces positive voltage on pin 2 relative to pin 3, pin 1 ground Sensitivity -53.5 dBV/Pa (2.11 mV/Pa (at 1 kHz, open circuit voltage) Dimensions &...
Page 9
Our web address is www.shure.com. Trademark Notices: Roswellite is a trademark and the circular S logo, the stylized Shure logo, and the word, “Shure” are registered trademarks of Shure Incorporated in the United States. These marks may be registered in other jurisdictions.
At its option Shure will repair or replace the defective product and promptly return it to you, or refund the purchase price. You should retain proof of purchase to validate the purchase date and return it with any warranty claim.