Alarm Set; Alarm Off; Backlight - Sharp Aquos LC-19D45U Operation Manual

Using the kitchen remote control unit

Alarm set

You can set the timer to automatically turn on the TV.
Press KITCHEN TIMER/CLOCK SET/
1
ALARM repeatedly until ALARM ON icon on
LCD fl ashing.
Press MIN/HOUR repeatedly to set hour
2
portion of ALARM.
Press SEC/MIN repeatedly to set minute
3
portion of ALARM.
With in 30 seconds, press SET/STOP to
4
confi rm settings.
After ALARM set, LCD display will be showing
5
as below.
After displaying above information for about 5
6
seconds, LCD returns to clock display again
as below.
When time reaches ALARM set value, switch
7
the TV power on or enters standby and make
beeper sound about 30 seconds, then ALARM
icon on LCD goes out.
• If there is no operation during setup within 30 seconds,
ALARM set procedure will be cancelled automatically.
• When beeper sounds, press SET/STOP to stop beeper
sound and set ALARM icon off.
ALARM ALARM

Alarm off

The ALARM set can be cancelled.
Press KITCHEN TIMER/CLOCK SET/
1
ALARM repeatedly until ALARM OFF icon on
LCD fl ashing.
Within 30 seconds, press SET/STOP to
2
cancel ALARM set and LCD returns to normal
clock display as below.
• If there is no operation during setup within 30 seconds,
ALARM
reset procedure will be cancelled automatically.
ALARM
• The initial value of
ALARM
• The set is valid only one time.

Backlight

Press LIGHT, backlight goes on for about 5 seconds
and then goes out.
ALARM ALARM
is 12:00 AM.
53