Basic adjustment settings
Advanced picture settings
Advanced setting enables you to set the picture
adjustment in more detail. There are four options you
can choose from.
C.M.S. (Color Management System)
Color tone is managed using the six-color adjustment
setting.
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "Advanced", and then
3
press ENTER.
Press a / b to select a specific adjustment
4
item among "C.M.S.-Hue", "C.M.S.-Saturation"
and "C.M.S.-Value", and then press ENTER.
C. M. S. – Hue
C. M. S. – Saturation
C. M. S. – Value
Color Temp.
Film Mode
3D - Y/C
Monochrome
I/P Setting
Press c / d to adjust the item to your desired
5
position.
• For resetting all adjustment items to factory preset values,
a / b
"Reset"
press
to select
Selected item
C.M.S-Hue
This is a standard to adjust the color
either more reddish or more bluish in tone.
C.M.S-
Increases or decreases the saturation of a
selected color
Saturation
C.M.S-Value
A higher value makes the image brighter.
A lower value makes the image darker
Color Temperature
For a better white balance, use color temperature
correction.
Selected item
High
White with Bluish tone
Mid-High
Middle
Mid-Low
Low
White with Reddish tone
28
R
[
0]
–
Y
[
0]
–
G
[
0]
–
C
[
0]
–
B
[
0] –
M
[
0] –
Reset
ENTER.
, and then press
Description
Description
Film Mode
Automatically detects a fi lm-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyzes it then recreates each still
fi lm frame for high-defi nition picture quality.
Selected item
On
Off
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
Selected item
Standard
Fast
Slow
Off
+
+
• 3D-Y/C is not selectable depending on the input signal
+
type.
+
• 3D-Y/C may not operate depending on the input signal
+
type or noisy input signal.
+
Monochrome
For viewing a video in monochrome.
Selected item
On
Off
I/P Setting
Adjusting the image and input signal can give you a
more beautiful picture.
Press MENU to display the MENU screen, and
1
then press c / d to select "Picture".
Press a / b to select "Advanced", and then
2
press ENTER.
Press a / b to select "I/P Setting", and then
3
press ENTER.
Press a / b to select "Fast" or "Slow", and
4
then press ENTER.
Selected item
Fast
Slow
Description
Detects, analyzes, converts fi lm source
Normal viewing mode
Description
Normal adjustment
For movie image
For still image
For Game Mode
Description
For viewing in monochrome
Normal color
Description
Suitable for fast-moving images
Suitable for smooth images with low
amounts of fl ickers