Sharp LC 10A2U Operation Manual page 25

SETUP (Continued)
I Saving broadcast TV channels into memory.
I Adding weak or additional channels or erasing unwanted channels from TV
memory.
MENU
POWER
MENU
CH
TV/VIDEO
CH (])/
CH
([)
FLASHBACK
1 2 3
DISPLAY
4 5 6
CHANNEL
8
7 9
SELECT
MUTE
0
Note:
I If you press VOL (+) again while in the CH SEARCH mode, auto-program will start again, and the previously
memorized channels will be lost.
ADJUSTMENT (Continued)
1.1
Press MENU to display the MENU
screen, then press CH (])/([) to
move the ">" mark to CH SETTING.
1.2
Press VOL (+)/(–) to display
SETUP mode, then press CH (])/
([) to move the ">" mark to "CH
SETTING".
1.3
Press VOL (+)/(–) to display CH
SETTING screen.
1.4
Press CH (])/([) to move the ">"
mark to "CH SEARCH", then press
VOL (+)/(–) to display CH SEARCH
screen.
START
2.1
Press VOL (+). The tuner will
search through all available chan-
nels in your area and add them into
the TV's memory.
STOP
2.2
Press VOL (–). CH SEARCH will
stop at the current channel and will
not add any higher channels.
2.3
Press MENU to exit.
1.1
Press MENU to display the MENU
screen, then press CH (])/([) to
move the ">" mark to "SETUP".
1.2
Press VOL (+)/(–) to display
SETUP mode, then press CH (])/
([) to move the ">" mark to "CH
SETTING".
1.3
Press VOL (+)/(–) to display CH
SETTING mode, then press CH
(])/([) to move the ">" mark to
"CH MEMORY".
2.1
Press VOL (+)/(–) to display CH
MEMORY.
2.2
Use CH (])/([) or CHANNEL
SELECT to select each desired
channel to add or erase.
2.3
Press VOL (+) to add a channel to
the TV's memory or press VOL (–)
to erase a channel from the TV's
memory.
2.4
Press MENU to exit.
(CH SETTING mode)
(CH SEARCH mode)
(CH SETTING mode)
VOL (+)
VOL (–)
to add channel 12
to erase channel 12
to the TV memory
to the TV memory
25