Selecting The Menu Items; Selecting A Menu Item - Sharp LC 10A2U Operation Manual

SELECTING THE MENU ITEMS

Selecting a Menu Item

• This LCD TV set allows you to adjust the picture and sound, and set the channels and other features
using the On Screen Display. Select the desired menu item by following the steps below and then refer
to the indicated page for details.
POWER MENU
MENU
CH
TV/VIDEO
CH (])/
CH
([)
FLASHBACK
1 2 3
DISPLAY
4 5 6
8
7 9
MUTE
0
LCDTV
* The screen indications shown above are larger than actual for easy reading.
1
Press the MENU to display the
MENU screen.
2
Press the CH (])/([) to select the
desired menu item.
• The ">" mark moves up or down.
• The ">" mark indicates the selected
menu item.
3
Press the VOL (+)/(–) to enter.
4
Press the MENU to exit.
Notes:
I The TINT display only appears when
the color system sets N358 or N443
or AUTO in the NTSC mode.
I The displayed items differ depending
on the setting conditions.
The selected item changes to yellow.
I
I Items in purple cannot be selected.
I TV mode
Note:
This product is factory set to comply
with the color system (NTSC-N358)
in the United States. For Brazil (PAL-
M), Argentina (PAL-N) and Uruguay
(PAL-N), set the color system before
using this product.
COLOR SYSTEM
I
Set the system to AUTO for normal
reception. The AUTO mode automati-
cally detects the receiving signal
system and changes the reception
system of the set.
When the picture or sound is not
stable, switching to an appropriate
system may improve the picture or
sound quality.
SLEEP TIMER
menu ----------------- Page 19
VIDEO ADJUST menu
(TV mode) ----- Page 20, 21
VIDEO ADJUST menu
(AV mode) ----- Page 20, 21
1
PRESET menu ---- Page 22
SETUP
menu ------ Page 23, 24, 25
17